554 Pegoland Flex White C2 TE S1: Special Cement Adhesive for Pools, Pavements, Facades, 5 kg Bag

£9.9
FREE Shipping

554 Pegoland Flex White C2 TE S1: Special Cement Adhesive for Pools, Pavements, Facades, 5 kg Bag

554 Pegoland Flex White C2 TE S1: Special Cement Adhesive for Pools, Pavements, Facades, 5 kg Bag

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

Swear words, sexual references, hate speech, discriminatory remarks, threats, or references to violence On ceramic pavements (overlays), remove the badly adhered pieces and fill the gaps with mortar the day before the application of the new tiling. Ensure that the old ceramic is free of traces of fats or waxes, if necessary proceed to the milling of the enameled surface until the loss of brightness of the old ceramic. In case of doubt, make a preliminary test to establish the suitability of the solution provided Preserve the original joints (expansion, contraction, division, perimeter joints, etc.) and the position within tiles (2 mm minimum in interior areas and 5 mm in exterior areas). Ceramic areas should be protected, for at least 24 hours, from any possible rain. Tiles areas will be ready after 7 days.

Do not use this product under any other circumstances that have not been described on this data sheet. On floorings with underfloor heating, apply when substrate is at room temperature (between 5ºC and 30ºC). Each review score is between 1-10. To get the overall score that you see, we add up all the review scores we’ve received and divide that total by the number of review scores we’ve received. In addition, guests can give separate ‘subscores’ in crucial areas, such as location, cleanliness, staff, comfort, facilities, value for money and free Wi-Fi. Note that guests submit their subscores and their overall scores independently, so there’s no direct link between them.

Observe construction joints (expansion, contraction, fraction, perimeter corner joints) and the joints between the cement slabs(minimum of 2 mm inside and 5 mm outside). Gluing of ceramic tiles, pool mosaics even on water proof surfaces treated with Morcem Dry products.

Gluing of mosaics in structures and stencil made out of extruded polystyrene panels used in Arabic bathrooms, hammam, and spas. The working time of the product, in normal temperature and humidity conditions, is about 1 hour- High temperatures reduce it and lower temperatures increase it. It is highly advisable to leave a free joint of expansion between the pavement and the wall or pillar, hidden by a skirting board of approximately 5 mm. These joints should be refilled with a deformable material from PUMALASTIC. Tiled areas of walls and floors above 50 m² indoor and 30 m² outdoor or elongated more than 15 linear m it is recommended to divide them with joints filled with a deformable grout (PUMALASTIC-PU).In case of waterproofing and placement, apply with a flat trowel a layer of at least 1 mm of product in the area to be waterproofed and once dry (after approximately 24 hours) apply the product with the corresponding notched trowel for the placement of the ceramic material. In exterior façades the placing of the material will be done with anchor or mechanic attachment under any of the following circumstances: superior to 2400 cm2 format, if one of the piece sides is more than 60 cm long, if the weight is higher than 40kg/m2 or if it is more than 3 metres high. The park has over 55 interactive rides, live shows and attractions, and it’s all set amid 150 acres of beautiful parkland. You can earn your first driving licence at the LEGO’s City Driving School, navigate the waterways at the LEGO’s City Coastguard HQ, ride a Dragon through a medieval castle, or even discover the lost metropolis of Atlantis in an underwater adventure with the Atlantis Submarine Voyage. Joints should be grouted 24 hours after if on vertical surfaces, and 48 hours after if on floorings. Use the appropriate mortar from the MORCEMCOLOR range depending on the type of joint. In radiant heating floors, apply the product when the substrate reaches room temperature (between 5ºC and 30ºC), the heater should be off at least 48 hours earlier, and it should be switched on gradually, minimum after 7 days, once the job is over.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop