The GLC-GE-DR-LX SFP can interoperate with other 1G SFPs/interfaces as long as those are based on 1000BASE-LX/LH standard. No attenuator is needed in any fiber strand. Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions, operations, and extended operations or supply chain is provided in the “Environment Sustainability” section of Cisco’s Corporate Social Responsibility (CSR) Report.

Cisco offers a broad portfolio of transceivers to enable 10/25G connectivity for enterprise and data center applications. Cisco already offers 10Gbps and 25Gbps cables and transceivers at several reaches. The SFP-10G-T-X fills the gap with 10GBASE-T connectivity. For more information about the Cisco Product Warranties, go to: http://www.cisco.com/en/US/products/prod_warranties_listing.html. The Cisco 1-Gbps SFPs are supported across a variety of Cisco networking equipment *. For more details, refer to the document SFP Compatibility Matrix at: https://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.pdf ProLabs extends network infrastructure capacity with its cost-effective portfolio of OEM-compatible. Read More White Papers 100G Beyond 10KM The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.In terms of Cisco original GLC-T vs GLC-TE vs SFP-GE-T transceivers, GLC-T and SFP-GE-T will be End-of-Sale June 1, 2017 and replaced by the GLC-TE. So then you can only buy GLC-TE transceivers from Cisco. If you’re dealing directly with a company like a telecom who specifically requires NEBS compliance, they’ll let you know and you should choose SFP-GE-T. But for most of the networks, GLC-T and GLC-TE transceivers are all you’d need for Gigabit Ethernet, and they cost less as well. Fiberstore (FS.COM) provides all these three SFP modules. We are manufactured to the exact same standards as Cisco’s own brand, and come with true lifetime warranties. Every SFP module in Fiberstore was tested to ensure 100% compatibility, but only cost a small fraction of name-brand alternatives. Flexibility of media and interface choice on a port-by-port basis, so you can “pay as you populate” This Cisco® GLC-TE compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. Technical Specification Compatible OEM This Cisco® GLC-TE compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. The GLC-BX-D and GLC-BX-U SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Since its inception in 2004, Fluxlight has continually refined its processes to assure the best possible quality for our customers. The foundational elements of these processes are Record-Keeping and Quality Assurance Testing (QAT). To maintain a robust data archive, each part is individually serialized both in its internal EEPROM memory and on its external label. All QAT results and other important information (e.g., manufacture date, compatibility programming) are associated with each Serial Number stored in our cloud-based secure database. QAT consists of visual part inspection as well as verification of all critical parameters and performance of each part. For the GLC-TE-FL optical output power and wavelength (N/A) are verified on optical spectrum analyzers. Receiver sensitivity is verified at both minimum distance and the 100m maximum range over actual (not simulated) CATx cable. In addition, the part is verified for proper operation across its full operating temperature range, -5C to 85C. Licensing The dual-rate 100M/1G 10Km SFP is interoperable with the IEEE 100BASE-LX and 1000BASE-LX/LH standards.ProLab's Product Solution Specialist Ambroise Thirion provides a detailed look into 100G beyond 10KM. Read More Discovering the truth behind PON interoperability and compatibility A GLC-BX80-D-I device is always connected to a GLC-BX80-U-I device with a single strand of standard SMF with an operating transmission range up to 80 km. FluxLight's GLC-TE-FL is a Cisco® compatible 1000Base SFP Transceiver and is factory pre-programmed with all the necessary configuration data for seamless network integration. Our transceivers perform identically to original Cisco® transceiver modules and are 100% compatible with other OEM and third party transceivers.The GLC-TE-FLCisco SFP transceiver is 100% MSA (Multi-Source Agreement) compliant. All FluxLight's transceivers are tested for 100% functionality and guaranteed compatible for outstanding network performance.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. The GLC-BX40-D-I, GLC-BX40-DA-I, and GLC-BX40-U-I SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. While existing 10GBASE-T switches such as the Cisco ® Nexus N93108TC-FX can provide such connectivity today, the introduction of the SFP+ modular form factor enables variety and flexibility in deployment. Instead of having to deploy a second dedicated 10GBASE-T switch, the SFP+ module can enable Cisco 10G and dual rate 10/25Gbps switches and routers to connect to 10GBASE-T RJ-45 endpoints using CAT6A cables. When shorter distances of Single-Mode Fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB. The 1000BASE-BX-D and 1000BASE-BX-U SFPs, compatible with the IEEE 802.3ah 1000BASE-BX10-D and 1000BASE-BX10-U standards, operate on a single strand of standard SMF. The GLC-GE-DR-LX SFP can interoperate with other 100M SFPs/interfaces as long as those are based on 100BASE-LX10 standard. A 5dB attenuator is needed on the path of dual-rate SFP Tx and 100BASE-LX10 interface Rx. No attenuator is needed on the other fiber strand.The table outlines the different BASE-T connectivity options using different cable types and reaches.

For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/products_end-of-life_policy.html . The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public.Learn how a leading German IT specialist company is working with ProLabs to more effectively deliver. Read More Case Study - City of Sacramento