This feature ensures even distribution, reduces excess adhesive, and ultimately enhances print quality, making it an ideal choice for 3D printing users. We started printing right back in 2014 and have tried every trick in the book when it comes to bed adhesion. When our filament users asked what we recommend for bed adhesion, we would always suggest this product. PayPal Credit and PayPal Pay in 3 are trading names of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH.

On the one hand, there is the traditional spray lacquer version that allows the product to be easily and quickly expanded; and on the other hand, the new version in liquid vaporizer that allows to concentrate more the product and avoids that it is finished sticking it in the mechanical parts of the 3D printer as it usually happens with the 3DLac in spray due to a bad use of it.Intel, the Intel Logo, Intel Inside, Intel Core, and Core Inside are trademarks of Intel Corporation in the U.

After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed. Especially for 3D printers feature 'Heated Bed' or "heated bed" although it is also valid for 3D printers with cold base. We’ve harnessed innovation and technology to create a one-of-a-kind solution that enhances the quality and precision of your nylon prints. One where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do.

The 3DLac Stick adhesive dries quickly, lasts very long and is compatible with multiple materials and 3D printing surfaces.

Tip: Before you remove the printed parts or the print model from the plate, wait until the temperature drops below 30 °C! If the removal is problematic, the part with the base can be placed in a fridge and the piece will be released only with a light touch. We’re dedicated to enhancing your nylon 3D printing experience with a comprehensive nylon starter pack.Proper adhesion of the extruded material to the 3D printing base is a crucial factor in successful 3D prints as it helps prevent layer misplacement, warping and deformations. Then, only some water is needed to easily clean your printing surface and your 3D printer is ready for your next printing. Printer Adhesive spray is the perfect substitute for Kapton tape, blue tape and other types of adhesives.