The disappointing part is that with ~5mm extra height on the shell and some clever rearranging of the internals, Louqe could have fit a 140x15mm fan on top. I suspect, though, that they wanted a solid top plate for aesthetic reasons. They're clearly good designers, though, so I'm sure they could come up with something. The next significant drop in size that I'd recommend is the Ncase M1. It does cost a bit more, but it's an excellent performer that's proven over the test of time. Some of these small sandwich builds can really build the heat on either the GPU or CPU, and some you are forced to use liquid cool. But the Ncase M1 let's you decide how you want to cool it - air or liquid. Great flexiblity, and you even have a Type C port available on the front. Just try to buy a GPU < 300mm in length to install into it. I've even seen 3090 builds in it, so it can definitely be a ton of power in such a small case. As for looks, the Ghost S1 is most similar. In fact, it looks quite a bit like the same case stood vertically if a few inches were added all around. This is not an issue; the design of the Ghost S1 is a major selling point for many buyers. However, people who were not fans of LOUQE’s last offering are unlikely to change their minds here. The new RAW S1 promises full gaming PC power in one of the smallest chassis currently available. Its thin, minimum aesthetic is also unique; the popular Corsair One and Ghost S1 are two of the only other thin cases of this size. Outside of these options, it is rare to find other models that can also support powerful components. In an already limited category, LOUQE aims to situate itself as the best option. The PSU will be mounted with the input AC connector pointing up, as close to the front side of the shell as possible. This serves two purposes: it moves the cable routing out of the airflow path, and it points the PSU exhaust up instead of forward, which should help a tiny bit.

The CPU Cooler Test - I'll get to this in more detail, but it convinced me thermals are acceptable which is not really the case. Considering the total size of this offering and its support for some of the largest graphics cards on the market, thermal performance holds up extremely well. There are not many fan formations – only two fans can fit in the case – but it is clear that airflow was a major consideration during design. I started with some tests of the CPU and GPU without the shell on. This allows us to get a sense for how the coolers perform in the best case scenario (open air) and serves as a sort of thermal performance target. For all the various configurations, mods, etc., I used Cinebench for CPU testing, Furmark for GPU testing, and Unigine Heaven for mixed/gaming.

The spine-and-shell design make the RAW S1 extremely easy to build in. With the shell off, you have plenty of room to install components, route cables, etc. I definitely recommend following the instructions since there are a few things to remove before the shell can be taken off. All of the included cables (PSU input, power switch, USB-C, PCI-E 4.0) were easy to install and route. There's some community unhappiness with the fact that the USB-C cable uses the mobo I/O instead of the internal connector. It's certainly easier, but there's no reason Louqe couldn't have added a hole in the case bottom with a proper USB-C internal cable.

However, you can fit a PC in here. There’s no AIO support, nor air filtration. So yes, there are sacrifices, but it offers among the easiest build processes – chances are you’ll be done building within the hour and have a very tidy end result. It will also happily fit huge triple-slot graphics cards, despite its ultra-compact 12-litter frame, and with a fancy ‘Cobalt’ PCIe 4.0 riser cable, there’s hardly a thing about this case that isn’t ultra-premium. It even has a carrying handle. Is it perfect? From one point of view, no. It doesn’t have air filtration. There’s no real front IO, and no room for expansion. But none of that is what the Louqe Raw S1 is about. Extra fans, filtration, and expansion space would make the chassis bigger and more complex, entirely defeating the point.Whoa! This is awful. CPU performance has tanked, and GPU temps are through the roof. The Air Temp tells the story here: even with an exhaust fan, the case is not able to get the hot air out. This does make me wonder a little about Louqe's quality control, and what kind of awful drill press their manufacturer is using. I have noticed a pattern of occasional QC issues like this popping up on Discord, but to Louqe's credit, their support does a great job of taking care of any issues. Because of this, I would actually say the Raw S1 is perfect – because it does a 100% job at achieving what the designers set out to achieve: a simple, easy-to-work-on minimalist system that looks the part and cools well. Despite the added pain, the extra fan definitely improves things. The CPU is nearing maximum performance. When I tested the extra fan in open air, though, the difference was minimal. This tells us that the real benefit to having the extra fan is not improving static pressure through the heatsink, but rather cool intake air! With such a tight fit, the extra fan basically acts as a gasket for the CPU cooler.

What sets the Louqe Raw S1 apart from the crowded world of PC cases is that it isn’t afraid to go in a totally different direction and limit your options. There is no tempered glass, no watercooling support, no RGB, nothing that falls into the typical trends of today’s day PC case design. And that, I applaud. It takes courage as designers to swim against the current and try something like this. Once that's all done, I'm going to test the other two coolers I mentioned above, and add an intake duct for the GPU.An important note: the Corsair One case is only available in prebuilt configurations, severely limiting GPU and CPU options. Meanwhile, the Raw S1 will support most graphics cards and CPUs on the market thanks to its construction. The Raw S1 is a more subtle design than the Corsair One, opting for simple sides and vents instead of the Corsair One’s LEDs and large vents. Instead, the Raw S1 looks much closer to its smaller brother, the Ghost S1. There are almost no markings or features on the outside of the case. In fact, the front only features one small button for power, and I/O options are limited to a single Type-C placed on an angled panel.