The global cabling standard ISO/IEC 11801 has been extended by the addition of amendment 2. This amendment defines new specifications for Cat6A components and Class E A permanent links. These new global Cat6A/ClassE A specifications require a new generation of connecting hardware offering far superior performance compared to the existing products that are based on the American TIA standard. [9] The most important point is a performance difference between ISO/IEC and EIA/TIA component specifications for the NEXT transmission parameter. At a frequency of 500MHz, an ISO/IEC Cat6A connector performs 3dB better than a Cat6A connector that conforms with the EIA/TIA specification (3dB equals 50% reduction of near-end crosstalk noise signal power; see half-power point). [9] Cat6 cable can be identified by the printing on the side of the cable sheath. [3] Cable types, connector types and cabling topologies are defined by ANSI/TIA-568.

Full Copper Cable - Suitable for POE applications such as CCTV as well as high speed networking data transfer ECA constructed cables are manufactured to meet the Construction Projects Regulation (CPR). A CPR Rated cable is tested for basic building regulation standards. This cable meets construction products regulations (CPR) which tests the cables reaction to fire and their emission of dangerous substances. The Giganet Category 6 UTP cables are manufactured and tested to the TIA/EIA 568‐B.2‐1, EN50173‐1 and ISO/ IEC11801 Category 6 specifications.Cat6 patch cables are normally terminated in 8P8C modular connectors, using either T568A or T568B pin assignments; performance is comparable provided both ends of a cable are terminated identically. Those looking to really future proof their network might want to look at the newer Cat 8 standard, which supports speeds of up to 40Gbits/sec at distances of up to 30m using the same RJ45 connectors as Cat 6a. Predictably, though, it’s expensive and mostly used in data centres to hook up the most demanding high-performance network kit. Which category do you need? Cat.6A ≠ Cat.6A ≠ Class E A". Next generation Cat. 6A. Tyco Electronics. Archived from the original on 2013-12-03. Cat 6 is capable of gigabit speeds (this is dependent on your network). Our cat 6 cables are high spec 23 AWG cables that are easily installed and provide reliable results every time!

Solid copper conductor Conforms to ISO/IEC11801 ANSI/TIA/ELE-568A Impedance- 100 /-15Ω Conductor Material:ANSI/TIA/EIA-568-B.1-2001 Approved: April 12, 2001; Commercial Building Telecommunications Cabling Standard Part 1: General Requirements" (PDF). 090917 nag.ru

Available in 50m 100m and also 305m (1000ft) CAT6 Gigabit - Pure Copper Cable Approx 7mm diameter cable 4x2x0.56 Copper / 0.98HDPE + 4.5 Separator + 6.0PE UV resistant Commercial Building Telecommunications Standard (PDF), archived from the original (PDF) on 2016-12-20 FULL COPPER Category 6 cable with twisted pairs for improved high signal integrity. Most cables are unshielded relying on the twisted pair design for noise rejection Often used in computer networks such as Ethernet connections.Our cat 6 cables are Full copper 23AWG ideal for indoor use most commonly used for networking although they can be used for sending signals over baluns or even used in CCTV applications.