Using a drill bit or something similar, you could make small openings into the divider to allow room for your valve and still be strong enough to keep it from collapsing when applying pressure of fuel is added in the fifth step of this process. Step 5: At the base of your Bic lighter’s fuel chamber, there is a rubber divider typically kept in place to keep it isolated and separated from other chambers for extra safety.

When poking into this opening, be careful not to make puncture any further than needed as doing so could cause an unwanted fuel leak once filled and could also put the lighter into a state of disrepair. Step 2: Fill the lighter with butane while keeping it upside down. A classic-size Bic lighter takes about 30 seconds to fill. Although, if this is your first time, I recommend you put less, as you will see in step 5. Step 5:Knowing how to refill a disposable lighter, on the other hand, is a useful survival ability and just good to know.

Butane would spill everywhere if you simply pressed the butane canister valve into the hole you created. As a result, you’ll need to add something to the valve to provide a proper seal. These lighters are refillable, preventing you from needing to buy more, saving you money in the long run. The body of the lighter boasts a fuel level window so you can easily tell when it is time to refill them, and at the bottom is a concealed hook for either attaching this to your waistband for easy access, or for hanging up to store in a safe area when no longer in use. And of course, a word of warning, you are playing with fire here, so please refill the butane lighter at your own risk. 1. The Pin What You Need Butane is both lighter and less dense than air, meaning that it will float in the atmosphere. This can make detecting a butane leak more difficult because it won’t sink to the floor like other fuel vapors. Butane can be quite pressurized, so as soon as any gas flow gets cut off, it’ll want all of its fluid out like a tempted faucet that just got shut! To prevent this, place your thumb on the Bic lighter’s hole when removing the butane canister so that nothing gets released. Step 6:

When you reload, there are no irritating push pins, no pressing your thumb over the hole, and no liquid fuel spurting anywhere. If you use lighters excessively and need to replace them, you should consider purchasing a refillable lighter.

To get past this obstacle, simply insert your pin and push it in until you can feel the ball inside trembling. This lets you know that the seal has been broken, allowing any lighter fluid to pass through this opening again. Step 2:The last phase before completing this process is to close it up! Taking away any finger and inserting a push pin should certainly do it. Pliers and a file can be used to make the pin more flush with the lighter’s surface so that it fits perfectly while still sealing any gaps.