You have the right to cancel within 7 working days after the day you take receipt of goods. You must notify us within For best results in landscaping, plant in groups and use different heights of trees to represent varying ages of the trees as well as for creating depth of field. As you move further from the viewing point or higher in the mountains, use shorter trees. Shorter trees may also be used for potted or tubbed trees. For the various materials found in PLASTRUCT’s Catalog, the following cements are recommended: STYRENE

We have found that many of our Plastic Patterned Sheets can be used for hard-to-find or unusual applications. For your assistance, we provide a few below: Please note many modelers refer to scale as a fraction, while others refer to it as a ratio. For instance, 1/48 is also referred to as 1:48. Both are correct. POPULAR MODELING SCALES HOBBY SCALE Here you will find several tables provided to assist you in determining scale ratios and/or dimensions. To create realistic welded (or riveted) tank seams, use a radiator hose clamp as your horizontal guide. Tighten the clamp around the tube, and using a hobby knife, lightly scribe lines every 8 scale feet around the tank. Scribe vertical lines using a straight edge.While certain types of paint adhere better than others on various types of plastic, almost any type of paint may be used. Alkyd oils are probably the best all around paints and are available in flat or satin finishes. Use Floquil brushable paints for painting basswood. The pigment in this paint is specially ground to provide good coverage without hiding detail. Latex paints are only suitable when the surface offers some mechanical bond (matte finish). Water colors and poster paints are not recommended. Lacquers are ideal for ABS and Butyrate but are not compatible with Styrene. Minwax stain is excellent for Basswood. Be sure to pre-stain all parts before gluing as the glue seals the wood and prevents the stain from penetrating. HEAT FORMING The material used in our Traditional Round Tubing medium is Butyrate plastic. It has proven to be ideal because it is so convenient to work with. It can be cut, turned, drilled, painted and easily cemented. The Tubing and Tubing Fittings are manufactured to provide a good friction fit and maintain the outside diameter; splines on the male Fittings accomplish tight fit and prevent undesired rotation and still allow intentional turning. This feature permits cementing to be a final operation. The telescoping sizes of the pipe combined with the workability makes improvisation quite simple. All Acrylic Rods may be cut using a fine tooth saw blade. Cut ends should be polished using a flame or WET & DRY fine grit sand paper. Bending may be accomplished by carefully softening the Acrylic using a torch flame or electric stove burner. This service does not deliver on a Saturday or Sunday. If you would like Saturday delivery please call us on 01782 409310.

PS-47 through 59 make excellent industrial vents when modified by adding Styrene Strips to every other slat. They can also be used as window awnings.

this time that you wish to cancel. You are required to take good care of the goods and return them to us at your own